Tork sürücülü malzeme test cihazları

Bileşenler veya malzemelerdeki tork testi için 2 Nm'den 2.000 Nm'ye kadar tork sürücüleri bulunur. Zwick, birçok farklı gereksinim için özel kurulum seçenekleri ile birlikte farklı malzeme test cihazları sunmaktadır.

test

Tork sürücü modüler bir sistem olarak geliştirildi ve bu nedenle de yenilenebilir. Birkaç test alanı için bir ana test belirtimine ek olarak, testXpert III test yazılımı ayrıca dört test ekseni için grafiksel bir dizi düzenleyicisi içerir. Tork testleri için yatay test ekseni ve opsiyonel ağırlık yükleme ünitesi bulunan TorsionLine tork test cihazları mevcuttur. Kullanıcı, bahsi geçen bütün malzeme test cihazlarıyla torsiyon testlerinde ölçüm, ayar ve kontrol elektroniği testControl ile desteklenmektedir.

Torsiyon motorları, modüler yapıları sayesinde her zaman yeniden donatılabilirler.

Önemli avantajlar ve özellikler

  • Modular design allows retrofitting of torsion drives as and when required
  • Operation with standard PC or laptop (no additional interface card required) and testXpert III testing software
  • High-resolution rotation angle and travel measurement
  • Easy handling and user-friendly operation for maximum flexibility
  • Synchronization of both test axes
  • Optional CE-compliant safety device for use with hazardous specimens and / or higher rotational speeds

Technical Overview

Torsion drive for zwickiLine

Torsion drives for mounting on the moving crosshead

Test torque, maximum
[Nm]

Fmax
[kN]

Rotational speeds
[r.p.m]

Pitch circle of connection flange[1] Ø
[mm]

Power consumption
[VA]

Electrical connection values

Item No.

2

2.5

0.01 to 80[2] (0.01 to 20)[3]

75/40

500

230 V AC 50/60 Hz 1Ph/PE/N

1020233

20

5

0.01 to 80[2] (0.01 to 20)[3]

75/40

800

230 V AC 50/60 Hz 1Ph/PE/N

1023835

  1. The torsion drive is supplied with an adapter with D=20 mm mounting stud
  1. With safety device and increased torsion drive speed (063785)
  1. Without safety device

Torsion drive for table-top testing machines

Torsion drives with flange connection

Item Nos. 646008, 642598 and 643934 are mounted on the upper or moving crosshead (010996 and 001556) (with central hole, Ø 70 mm). Item No. 053845 is mounted on the remaining moving crossheads.

Test torque, max.
[Nm]

Fmax
[kN]

Rotational speeds
[rpm]

Bolt circle, connecting flange[1] Ø
[mm]

Power consumption
[kVA]

Item No.

2

2.5

0.01 to 80[2] (0.01 to 20)[3]

75/40

0.44

646008

5

2.5

0.01 to 40[2] (0.01 to 20)[3]

75/40

0.44

642598

10

2.5

0.01 to 20[2] (0.01 to 20)[3]

75/40

0.44

643934

20

5

0.01 to 20[2] (0.01 to 20)[3]

75/40

0.8

053845

  1. an adapter plus mounting stud (Ø 20 mm) is supplied with the torsion drive
  1. with safety device and in conjunction with increased rotational speed (063785)
  1. without safety device

Torsion drives with mounting stud

Item Nos. 636852 and 648210 are mounted on the remaining moving crosshead. Item Nos. 631292, 636968 and 631282 are mounted on the upper crosshead (with central hole, Ø 190 mm).

Test torque, max.
[Nm]

Fmax
[kN]

Rotational speeds

Mounting stud
[mm]

Power consumption
[kVA]

Electrical supply data
[V]

Item No.

100

5

Ø 20

2.2

230V AC 50/60Hz 1Ph/PE/N

636852

200

5

0.002 to 20

Ø 20

2.2

230V AC 50/60Hz 1Ph/PE/N

648210

100

20

0.002 to 10

Ø 36

2.2

230V AC 50/60Hz 1Ph/PE/N

631292

100

250

0.002 to 10

Ø 60

2.2

230V AC 50/60Hz 1Ph/PE/N

636968

200

250

0.01 to 5

Ø 60

2.2

230V AC 50/60Hz 1Ph/PE/N

631282

Torsion drive for floor-standing testing machines

Torsion drives

Test torque, max.
[Nm]

Fmax
[kN]

Rotational speeds
[rpm]

Mounting stud
[mm]

Power consumption
[kVA]

Electrical supply data
[V]

Item No.

100

250

0.002 to 10

Ø 60

2.2

230V AC 50/60Hz 1Ph/PE/N

636968

200

250

0.01 to 5

Ø 60

2.2

230V AC 50/60Hz 1Ph/PE/N

631282

500

250

Ø 60

2.2

230V AC 50/60Hz 1Ph/PE/N

636969

500

250

Ø 60

5

400V AC 50/60Hz 3Ph/PE/N

636970

1000

250

Ø 60

5

400V AC 50/60Hz 3Ph/PE/N

636971

2000

250

Ø 60

5

400V AC 50/60Hz 3Ph/PE/N

636972

Grippers checked with Zwick testing machine

Around the world Schunk is regarded as the leading exponent in clamping technology and gripping systems. This innovative family concern has a standard range covering over 11,000 components. These include tool-holder systems, lathe chucks, stationary clamping systems and jaws, together with gripping, rotary and linear modules, robot accessories and components for modular high-performance assembly. For product evaluations on new grippers Schunk uses a Zwick testing system.
En iyi